This is the chapter 7 of the golang comprehensive tutorial series. Refer to this link for other chapters of the series – Golang Comprehensive Tutorial Series

Next Tutorial – Functions
Previous Tutorial –Variables

Now let’s check out the current tutorial. Below is the table of contents for current tutorial.

Table of Contents

Overview

Golang is a statically typed programming language meaning that each variable has a type. Go has several built-in types. Data types in Go can be categorized into two types.

Basic Types
Composite Types

Basic Types
- Integers
  - Signed
    - int
    - int8
    - int16
    - int32
    - int64
  - Unsigned
    - uint
    - uint8
    - uint16
    - uint32
    - uint64
    - uintptr
- Floats
  - float32
  - float64
- Complex Numbers
  - complex64
  - complex128
- Byte
- Rune
- String
- Boolean
Composite Types
- Collection/Aggregation or Non-Reference Types
  - Arrays
  - Structs
- Reference Types
  - Slices
  - Maps
  - Channels
  - Pointers
  - Function/Methods
- Interface
  - Special case of empty Interface

Basic Types

In this article we are going to discuss basic types only.

Integers

Integers can be signed or unsigned.

Signed Integers

Signed integers are of 5 types as below

Type	Size
int	Platform Dependent
int8	8 bits/1 byte
int16	16 bits/2 byte
int32	32 bits/4 byte
int64	64 bits/8 byte

int

Size: Platform Dependent.

On 32 bit machines, the size of int will be 32 bits or 4 byte.
On 64 bit machines, the size of int will be 64 bits or 8 byte

Range: Again Platform dependent

On 32 bit machines, the size of int will be 32 bits or 4 bytes.
On 64 bit machines, the size of int will be 64 bits or 8 bytes

When to Use:

It is a good idea to use intwhenever using signed Integer other than the cases mentioned below
- When the machine is a 32 bit and the range needed is greater than -231to 231-1, then use int64 instead of int. Note that in this case for int64, 2 32-bit memory addresses to form a 64-bit number together.
- When the range is less then use the appropriate integer type.

Properties:

Declare a int

var a int

int is default type for integer. When you don’t specify a type the default will be int

b := 2 //The default is also intfmt.Println(reflect.TypeOf(b)) => int

bits package of golang can help know the size of an int on your system

//This is computed as const uintSize = 32 << (^uint(0) >> 32 & 1) // 32 or 64sizeOfIntInBits := bits.UintSizefmt.Println(sizeOfIntInBits) => 32 0r 34

unsafe.Sizeof() function can also be used to see the size of int in bytes

Full Working Code

Below is the full working code of the above properties

package main
import (
"fmt"
"math/bits"
"reflect"
"unsafe"
)
func main() {
//This is computed as const uintSize = 32 << (^uint(0) >> 32 & 1) // 32 or 64
sizeOfIntInBits := bits.UintSize
fmt.Printf("%d bits\n", sizeOfIntInBits)
var a int
fmt.Printf("%d bytes\n", unsafe.Sizeof(a))
fmt.Printf("a's type is %s\n", reflect.TypeOf(a))
b := 2
fmt.Printf("b's typs is %s\n", reflect.TypeOf(b))
}

Output:

64 bits
8 bytes
a's type is int
b's typs is int

int8

Size: 8 bits or 1 byte

Range: -2⁷to 2⁷-1.

When to Use:

Use int8 when there it is known that the int range will be between -2⁷to 2⁷-1. For temporary values such as loop invariants, it is still advisable to use int even though it might take more space because it is likely to be promoted to int in some operations or library calls.

For array values which lies between -27to 27-1, is a good use case for using int8. For eg if you are storing ASCII index for lowercase letters then int8 can be used.
It is a good idea to use int8 for data values.

int16

Size: 16 bits or 2 byte
Range: -2¹⁵to 2¹⁵-1.When to Use:

Use int16 when there it is known that the int range will be between -2¹⁵to 2¹⁵-1. For temporary values such as loop invariants, it is still advisable to use int even though it might take more space because it is likely to be promoted to int in some operations or library calls.

For array values which lie between -215to 215-1, is a good use case for using int8. For eg if you are storing ASCII index for lowercase letters then int16 can be used.

int32

Size: 32 bits or 4 byte
Range: -2³¹to 2³¹-1.

int64

Size: 64 bits or 8 byte
Range: -2⁶³to 2⁶³-1.When to Use:

int64 is used when range is higher. For eg time.Duration is of type int64

UnSigned

UnSigned integers are of 5 types as below

Type	Size
uint	Platform Dependent
uint8	8 bits/1 byte
uint16	16 bits/2 byte
uint32	32 bits/4 byte
uint64	64 bits/8 byte

uint

Size: Platform Dependent.

On 32 bit machines the size of int will be 32 bits or 4 byte.
On 64 bit machines the size of int will be 64 bits or 8 byte

Range: Again Platform dependent

On 32 bit machines the range of int will be -2³¹to 2³¹-1.
On 64 bit machines the range of int will be -2⁶³to 2⁶³-1

When to Use:

It is a good idea to use uint whenever using signed Integer other than the cases mention below
- When machine is a 32 bit and range needed is greater than -2³¹to 2³¹-1, then use int64 instead int. Note that in this case for int64, 2 32-bit memory addresses to form a 64-bit number together.
- When the range is less then use the appropriate int type

Properties:

Declare a uint

var a uint

bits package of golang can help know the size of an uint on your system

//This is computed as const uintSize = 32 << (^uint(0) >> 32 & 1) // 32 or 64sizeOfUintInBits := bits.UintSizefmt.Println(sizeOfIntInBits) => 32 or 64

unsafe.Sizeof() function can also be used to see the size of uint in bytes

Full Working Code

Below is the full working code of the above properties

package main
import (
"fmt"
"math/bits"
"reflect"
"unsafe"
)
func main() {
//This is computed as const uintSize = 32 << (^uuint(0) >> 32 & 1) // 32 or 64
sizeOfuintInBits := bits.UintSize
fmt.Printf("%d bits\n", sizeOfuintInBits)
var a uint
fmt.Printf("%d bytes\n", unsafe.Sizeof(a))
fmt.Printf("a's type is %s\n", reflect.TypeOf(a))
}

Output:

64 bits
8 bytes
a's type is uint

uintptr

This is an unsigned integer type that is large enough to hold any pointer address. Therefore is size and range are platform dependent.

Size: Platform Dependent

On 32 bit machines, the size of an int will be 32 bits or 4 bytes.
On 64 bit machines, the size of an int will be 64 bits or 8 bytes.

Range: Again Platform dependent

On 32 bit machines the range of int will be -2³¹to 2³¹-1.
On 64 bit machines the range of int will be -2⁶³to 2⁶³-1

Properties:

A uintptr can be converted to unsafe.Pointer and vice versa
Arithmetic can be performed on the uintptr
uintptr even though it holds a pointer address, is just a value, and does not reference any object. Therefore
- Its value will not be updated if the corresponding object moves. For Eg When goroutine stack changes
- The corresponding object can be garbage collected.

When to Use:

Its purpose is to be used along with unsafe.Pointer mainly used for unsafe memory access.
When you want to save the pointer address value for printing it or storing it. Since the address is just stored and does not reference anything, the corresponding object can be garbage collected.

Full Working Code

package main
import (
"fmt"
"unsafe"
)
type sample struct {
a int
b string
}
func main() {
s := &sample{a: 1, b: "test"}
//Getting the address of field b in struct s
p := unsafe.Pointer(uintptr(unsafe.Pointer(s)) + unsafe.Offsetof(s.b))
//Typecasting it to a string pointer and printing the value of it
fmt.Println(*(*string)(p))
}

Output

test

uint8

Size: 8 bits or 1 byte
Range: 0 to 255 or 0to 2⁸-1.When to Use:

Use uint8 when there it is known that the int range will be between 2⁸-1. For temporary values such as loop invariants, it is still advisable to use int even though it might take more space because it is likely to be promoted to int in some operations or library calls.
For array values which lies between 2⁸-1. is a good use case for using uint8. For eg if you are storing ascii index in an array then uint8 can be used.

uint16

Size: 16 bits or 2 byte
Range: 0 to 2¹⁶-1When to Use:

Use int16 when there it is known that the int range will be between 0 to 2¹⁶-1. For temporary values such as loop invariants it is still advisable to use int even though it might take more space, because it is likely to be promoted to int in some operations or library calls.
For array values which lies between -0 to 2¹⁶-1, is a good use case for using int8.

uint32

Size: 32 bits or 4 byte
Range: 0 to 2³²-1

uint64

Size: 64 bits or 8 byte
Range: 0 to 2⁶⁴-1When to Use:

uint64 is used when the range is higher.

Floats

Floats are numbers with decimals. It is of two types

Type	Size
float32	32 bits or 4 bytes
float64	64 bits or 8 bytes

float64 is the default float type. When you initialize a variable with a decimal value and don’t specify the float type, the default type inferred will be float64.

float32

float32 uses a single-precision floating-point format to store values. Basically, it is the set of all IEEE-754 32-bit floating-point numbers. The 32 bits are divided into – 1 bit sign, 8 bits exponent, and 23 bits mantissa. float 32 take half much size as float 64 and are comparatively faster on some machine architectures.

Size: 32 bits or 4 bytes

Range: 1.2E-38 to 3.4E+38

DefaultValue: 0.0

When to Use:

If in your system memory is a bottleneck and range is less, then float32 can be used.

Example:

The below code example illustrates below points

Declare a float32
Print size of float32 in bytes

Code:

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
//Declare a float32
var a float32 = 2
//Size of float32 in bytes
fmt.Printf("%d bytes\n", unsafe.Sizeof(a))
fmt.Printf("a's type is %s\n", reflect.TypeOf(a))
}

Output:

4 bytes
a's type is float32

float64

float64 uses a double-precision floating-point format to store values. Basically it is the set of all IEEE-754 64-bit floating-point numbers. The 64 bits are divided into – 1-bit sign, 11 bits exponent, 52 bits mantissa. float64 takes twice as much size compared to float32 but can represent numbers more accurately than float32.

Size: 32 bits or 4 bytes

Range: 1.2E-38 to 3.4E+38

DefaultValue: 0.0

When to Use:

When the precision needed is high

Example:

The below code example illustrates below points

Declare a float64
Print size of float64 in bytes
Default is float64 when you don’t specify a type

Code:

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
//Declare a float64
var a float64 = 2
//Size of float64 in bytes
fmt.Printf("%d bytes\n", unsafe.Sizeof(a))
fmt.Printf("a's type is %s\n", reflect.TypeOf(a))
//Default is float64 when you don't specify a type
b := 2.3
fmt.Printf("b's type is %s\n", reflect.TypeOf(b))
}

Output:

8 bytes
a's type is float64
b's type is float64

Complex Numbers

Complex Numbers are of two types

Type	Property
complex64	Both real and imaginary part are float32
complex128	Both real and imaginary part are float64

The default complex type is complex128

Initialization

Complex Numbers can be initialized in two ways

Using complex function. It has below signature. Do make sure that both a and b should be of same type , meaning either they both should be float32 or both should be float64

complext(a, b)

Using the shorthand syntax. This is used when creating a complex number with direct numbers. The complex type created using below method will be of type complex128 if type is not specified

a := 5 + 6i

complex64

For complex 64 both real and imaginary part are float32

Size: Both real and imaginary part are of same size as float32. It is of size 32 bits or 4 bytes

Range: Both real and imaginary part range is same as float32 i.e 1.2E-38 to 3.4E+38

Example

Below is a sample code that shows

How to create a complex64 number using the above two method
Print size of a complex64 number. Size will be 8 bytes(4 +4) which is equivalent to two float32 numbers
Print type of a complex64 number
+ operation on complex number

Code:

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
var a float32 = 3
var b float32 = 5
//Initialize-1
c := complex(a, b)
//Initialize-2
var d complex64
d = 4 + 5i
//Print Size
fmt.Printf("c's size is %d bytes\n", unsafe.Sizeof(c))
fmt.Printf("d's size is %d bytes\n", unsafe.Sizeof(d))
//Print type
fmt.Printf("c's type is %s\n", reflect.TypeOf(c))
fmt.Printf("d's type is %s\n", reflect.TypeOf(d))
//Operations on complex number
fmt.Println(c+d, c-d, c*d, c/d)
}

Output:

c's size is 8 bytes
d's size is 8 bytes
c's type is complex64
d's type is complex64
(7+10i) (-1+0i) (-13+35i) (0.902439+0.12195122i)

complex128

For complex128 both real and imaginary part are float64

Size: Both real and imaginary part are of same size as float64. It is of size 64 bits or 8 bytes

Range: Both real and imaginary part range is same as float64 i.e -1.7E+308 to +1.7E+308

Example

Below is a sample code that shows

How to create a complex128 number using above two method. It also shows when type is not specified, the default type will be complex128
Print size of a complex128 number. Size will be 16 bytes(8 +8) which is equivalent to two float64 numbers
Print type of a complex128 number
Different operations on complex number

Code:

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
var a float64 = 3
var b float64 = 5
//Initialize-1
c := complex(a, b)
//Initialize-2. When don't specify a type , the default type will be complex128
d := 4 + 5i
//Print Size
fmt.Printf("c's size is %d bytes\n", unsafe.Sizeof(c))
fmt.Printf("d's size is %d bytes\n", unsafe.Sizeof(d))
//Print type
fmt.Printf("c's type is %s\n", reflect.TypeOf(c))
fmt.Printf("d's type is %s\n", reflect.TypeOf(d))
//Operations on complex number
fmt.Println(c+d, c-d, c*d, c/d)
}

Output:

c's size is 16 bytes
d's size is 16 bytes
c's type is complex128
d's type is complex128
(7+10i) (-1+0i) (-13+35i) (0.902439024390244+0.12195121951219513i)

Byte

byte in Go is an alias for uint8 meaning it is an integer value. This integer value is of 8 bits and it represents one byte i.e number between 0-255). A single byte therefore can represent ASCII characters. Golang does not have any data type of ‘char’. Therefore

byte is used to represent the ASCII character

rune is used to represent all UNICODE characters which include every character that exists. We will study about rune later in this tutorial.

Define Byte

var rbyte byte := 'a'

While declaring byte we have specify the type, as we have in the program above. If we don’t specify the type, then the default type is meant as a rune.

Example

In below code example:

How to define a byte
Print the byte type
Print size of byte

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
var r byte = 'a'
//Print Size
fmt.Printf("Size: %d\n", unsafe.Sizeof(r))
//Print Type
fmt.Printf("Type: %s\n", reflect.TypeOf(r))
//Print Character
fmt.Printf("Character: %c\n", r)
s := "abc"
//This will the decimal value of byte
fmt.Println([]byte(s))
}

Output:

Size: 1
Type: uint8
Character: a
[97 98 99]

Rune

rune in Go is an alias for int32 meaning it is an integer value. This integer value is meant to represent a Unicode Code Point. To understand rune you have to know what Unicode is. Below is short description but you can refer to famous blog post about it – The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)

What is UniCode

Unicode is a superset of ASCII characters which assigns a unique number to every character that exists. This unique number is called Unicode Code Point.

For eg

Digit 0 is represented as Unicode Point U+0030 (Decimal Value – 48)
Small Case b is represented as Unicode Point U+0062 (Decimal Value – 98)
A pound symbol £is represented as Unicode Point U+00A3 (Decimal Value – 163)

Visit https://en.wikipedia.org/wiki/List_of_Unicode_characters to know about Unicode Point of other characters. But Unicode doesn’t talk about how these code points will be saved in memory. This is where utf-8 comes into picture

UTF-8

utf-8 saves every Unicode Point either using 1, 2, 3 or 4 bytes. ASCII points are stored using 1 byte. That is why rune is an alias for int32 because a Unicode Point can be of max 4 bytes in Go as in GO every string is encoded using utf-8.

Every rune is intended to refer to one Unicode Point. For eg if you print a string after typecasting it to a rune array then it will print the Unicode Point for each of character. For for below string “0b£” output will be – [U+0030 U+0062 U+00A3]

fmt.Printf("%U\n", []rune("0b£"))

Declare Rune

A rune is declared using a character between single quotes like below declaring a variable named ‘rPound’

rPound := '£'

After declaring Rune you can perform below things as well

Print Type – Output will be int32

fmt.Printf("Type: %s\n", reflect.TypeOf(rPound))

Print Unicode Code Point – Output will be U+00A3

fmt.Printf("Unicode CodePoint: %U\n", rPound)

Print Character – Output will be £

fmt.Printf("Character: %c\n", r)

When to Use

You should use a rune when you intend to save Unicode Code Point in the value. A rune array should be used when all values in the array are meant to be a Unicode Code Point.

Code:

Below is the code illustrating each point we discussed

package main
import (
"fmt"
"reflect"
"unsafe"
)
func main() {
r := 'a'
//Print Size
fmt.Printf("Size: %d\n", unsafe.Sizeof(r))
//Print Type
fmt.Printf("Type: %s\n", reflect.TypeOf(r))
//Print Code Point
fmt.Printf("Unicode CodePoint: %U\n", r)
//Print Character
fmt.Printf("Character: %c\n", r)
s := "0b£"
//This will print the Unicode Points
fmt.Printf("%U\n", []rune(s))
//This will the decimal value of Unicode Code Point
fmt.Println([]rune(s))
}

Output:

Size: 4
Type: int32
Unicode CodePoint: U+0061
Character: a
[U+0030 U+0062 U+00A3]
[48 98 163]

String

string is a read only slice of bytes in golang. String can be initialized in two ways

using double quotes “” eg “this”

string in double quotes honors the escape sequences. For eg if the string contains a \n then while printing there will be a new line

using back quotes ` eg \`this`

String in back quotes is just a raw string and it does not honor any kind of escape sequences.

Each character in a string will occupy some bytes depending upon encoding used. For eg in utf-8 encoded string, each character will occupy between 1-4 bytes. You can read about utf-8 in this must read famous blog-The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!). In utf-8 , the characters a or b are encoded using 1 byte while the character pound sign £ is encoded using two bytes . Therefore the string “ab£” will output 4 bytes when you will convert the string to byte array and print it like below

s := "ab£"
fmt.Println([]byte(s))

Output

[48 98 194 163]

Also when you try to print the length of the above string using len(“ab£”), it will output 4 and not 3 because it contains 4 bytes.

Also note that range loops over sequences of byte which form each character, therefore for the below range loop

for _, c := range s {
fmt.Println(string(c))
}

Output will be

a
b
£

There are many operations that can be performed on a string. One such operation is concatenation which combines two string. The sign ‘+’ is used for concatenation. Let’s see full working code for all above things that we discussed

Code:

package main
import (
"fmt"
)
func main() {
//String in double quotes
x := "this\nthat"
fmt.Printf("x is: %s\n", x)
//String in back quotes
y := `this\nthat`
fmt.Printf("y is: %s\n", y)
s := "ab£"
//This will print the byte sequence.
//Since character a and b occupies 1 byte each and £ character occupies 2 bytes.
//The final output will 4 bytes
fmt.Println([]byte(s))
//The output will be 4 for same reason as above
fmt.Println(len(s))
//range loops over sequences of byte which form each character
for _, c := range s {
fmt.Println(string(c))
}
//Concatenation
fmt.Println("c" + "d")
}

Output:

x is: this
that
y is: this\nthat
[97 98 194 163]
4
a
b
£
cd

Booleans

The data type is bool and has two possible values true or false.

Default Value: false

Operations:

AND – &&
OR – ||
Negation – !

Example

The below code example shows

If not initialized the default value is false
All the above operations on the bool

Code

package main
import "fmt"
func main() {
//Default value will be false it not initialized
var a bool
fmt.Printf("a's value is %t\n", a)
//And operation on one true and other false
andOperation := 1 < 2 && 1 > 3
fmt.Printf("Ouput of AND operation on one true and other false %t\n", andOperation)
//OR operation on one true and other false
orOperation := 1 < 2 || 1 > 3
fmt.Printf("Ouput of OR operation on one true and other false: %t\n", orOperation)
//Negation Operation on a false value
negationOperation := !(1 > 2)
fmt.Printf("Ouput of NEGATION operation on false value: %t\n", negationOperation)
}

Output:

a's value is false
Ouput of AND operation on one true and other false false
Ouput of OR operation on one true and other false: true
Ouput of NEGATION operation on false value: true

Conclusion

This is all about basic types in golang. Hope you have liked this article. Please share feedback or improvement or mistakes in comments

Next Tutorial – Functions
Previous Tutorial –Variables